Dual boot Windows 8.1 and Mac Yosemite with GPT using Clover Boot Loader

We have already discuss about Hackintosh Boot Loader but still this time we are providing Detail guide for dual booting Windows 8.1 and Mac OS X Yosemite 10.9.2 with GUID Partition Table using Clover Boot Loader,Clover is an open-source EFI-based boot loader which has a totally different approach from Chameleon and Chimera, in fact it can emulate the EFI portion present on real macs and boot the OS from there instead of using the regular legacy BIOS approach used by Chameleon and Chimera. This highly recommended for UEFI motherboard. 

(adsbygoogle = window.adsbygoogle || []).push({});

Advantages Of Clover Boot Loader 

=>Boots troublesome desktop and laptop BIOS/UEFI
=>Uses native OS X installation media
=>Ability to patch DSDT/kernel/kexts at boot time
=>Creates OS X Recovery partition
=>No boot0 error with 4K Advanced Format drives
=>Solves multi-boot issues with Linux and Windows 7/8
=>Solves traditional Boot loader NVRAM issues related to iMessage/FaceTime

Requirement:-

1. MAC OS X Yosemite Application Download it from the Mac App Store
2. 2 USB flash drive 8GB and 4GB for Mac and Windows
3.Windows 8.1 or Windows 10 ISO image
4.Working Hackintosh or Macintosh System

Section 1 Install OS X

Prepare Bootable USB Drive For Mac 

1. Insert the USB drive

2. Open /Applications/Utilities/Disk Utility
3. Highlight the USB drive in left column

4. Click on the Partition tab

(adsbygoogle = window.adsbygoogle || []).push({});

5. Click Current and choose 1 Partition
6. Click Options...
7. Choose GUID Partition Table8. Under Name: type USB (You can rename it later)
9. Under Format: choose Mac OS Extended (Journaled)
10. Click Apply then Partition
11. Open /Applications/Utilities/Terminal
12. Type the following code, enter password and hit enter. This command completely erases the USB, then creates native OS X installer media from the Install OS X Yosemite Application.

 sudo /Applications/Install OS X Yosemite.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install OS X Yosemite.app --no interaction

Upon completion, the USB will be renamed Install OS X Yosemite.

13. Download the latest version of Clover from sourceforge
14. Open Clover package installer
15. Hit Continue, Continue, Change Install Location to USB...
16. Choose the USB, now called Install OS X Yosemite
17. Hit Customize and install Clover to the same USB with the following Custom Install settings:

20. Navigate to /EFI/CLOVER/ and replace default config.plist with attached config.plist*

21. Navigate to /EFI/CLOVER/kexts/ and create a folder called 10.10

22. Navigate to /EFI/CLOVER/kexts/10.10/ and add FakeSMC.kext & VoodooPS2Controller.kext

23. Navigate to /EFI/CLOVER/kexts/10.10/ and add your ethernet kext

24. Navigate to /EFI/CLOVER/kexts/10.10/ and add NullCPUPowerManagement.kext

25. Navigate to /EFI/CLOVER/drivers64UEFI/ remove VBoxHfs-64.efi and addHFSPlus.efi

26. (Optional) Navigate to /EFI/CLOVER/ACPI/patched / and add DSDT.aml and SSDT.aml 

(adsbygoogle = window.adsbygoogle || []).push({});

Install OS X Yosemite First 

1. Turn on the computer

2. Press the hotkey to choose boot device usually DEL,F10 

3. Choose USB 

If using a USB 3.0 port, the boot manager screen may appear, at which point proceed with steps a-b.

a. Choose Boot Manager

b. Choose EFI USB Device

4. When Clover boot Appears, choose Boot OS X Install from OS X Install OS X Yosemite 

5. The system will then boot into OS X Installer

6. For a dual booting we need two separate partition for each os so erase entire drive and make two partition

a. Choose Disk Utility

b. Highlight your target hard drive for the Yosemite installation in left column. 

c. Click Partition tab

d. Click Current and choose 2 Partition

e. Click Options...

f. Choose GUID Partition Table

g. Under First Partition Name: type Yosemite (You can rename it later)

h. Under Format: choose Mac OS Extended (Journaled)

i. Under Second Partition Name: type Windows 8.1 (You can rename it later)

j. Under Format: choose Mac OS Extended (Journaled)

l. Click Apply then Partition

l. Close Disk Utility

7. When the installer asks you where to install, choose Yosemite,

8. Upon completion, system will restart a 1st time 

9. Press the hotkey to choose boot device 

10. Choose USB

11. When Clover boot screen is visible, choose Boot OS X Install from OS X Install OS X Yosemite 

The system will boot into the new drive, create the recovery partition, and complete the installation. Upon completion, system will restart a 2nd time.

12. Press the hotkey to choose boot device 

13. When Clover boot screen is visible, choose Yosemite

14. The system will launch OS X Setup and it will reach you to Desktop 

(adsbygoogle = window.adsbygoogle || []).push({});

Post-Installation

At this time Our HDD is not bootable so we need to install Boot Loader so we can boot our Mac Yosemite without using USB media which we created for installing Yosemite 

Again Open Clover Boot Loader and do the install it like i did 

In my case i did not choose Install For UEFI Booting because i have Legacy Bios but if you have UEFI platform then kindly select UEFI else your system will become bootable 

Tricky Part 

Once you Successfully install Clover then Mount your EFI partition and do several settings like i did 

1.Navigate to /Volumes/EFI/EFI/CLOVER/ and edit config.plist

2.Navigate to /Volumes/EFI/EFI/CLOVER/kexts/ and create a folder called 10.10

3.Navigate to /Volumes/EFI/EFI/CLOVER/kexts/10.10/ and add FakeSMC.kext+Voodoops2Controller.kext

4.Navigate to /Volumes/EFI/EFI/CLOVER/kexts/10.10/ and add your ethernet kext

5.(Optional if you both SSDT and DSDT) Navigate to /Volumes/EFI/EFI/CLOVER/ACPI/patched/ and add DSDT.aml and SSDT.aml 

Links to download Config.plist

1=Standerd 

2=NVDIA GE=YES

3=ATI GE=YES

4=For HD4600
I assume you have install Mac OS X Yosemite Successfully 

Section 2 Install Windows

Prepare Bootable USB Drive For Windows 

1. Insert the USB drive
2. Open /Applications/Utilities/Disk Utility
3. Highlight the USB drive in left column

4. Click on the Partition tab
5. Click Current and choose 1 Partition
6. Click Options...
7. Choose Master Boot Record8. Under Name: type Windows
9. Under Format: choose Fat 32
10. Click Apply then Partition and wait for completion 

11.Mount the Windows 8.1 or Windows 10 ISO and copy all the contend

12.Open USB and Paste all contend it take 5-10 min depends on your flash drive speed

USB is now ready now restart you System without ejecting USB

13.After you got the Clover Boot Menu go to the EFI shell 

14.Identify you USB drive it is most probably is FS0 

15.inter into FS0 by using this command "FS0:" without double inverted 

16.once you enter in FS0 then use following command "EFI/BOOT/BOOT64.EFI"without double inverted
If you have trouble like Windows cant install on MBR it need GPT then go through the following Guide

Convert hybrid GPT Partition to Pure GPT Partition 

Using those command Windows installer booted In EFI mode 

17.Once you successfully boot into the Windows Installer on Partition section delete Windows 8.1 partition and recreate it,Recreation will automatically create MSR partition 

18.Install the Windows it will take time to install,Once you got first restart then remove the USB from Computer and boot normally,It will boot the Clover Boot Menu and choose the Windows partition and continue the setup 

19.Once you Got desktop then install Drivers for windows

Now Dual boot is ready..

Note:-This guide is only works on 64 bit version of Windows 7/8/8.1/10 but 32 bit will not works 

//

Source: New feed2